Freelander Service Procedures
LIGHTING
REPAIRS
86-2-5
Lamp assembly - flasher side repeater -
front
$% 86.40.53
Remove
1. Push lamp towards rear of vehicle to release
spring clip, and release lamp from wing.
2. Disconnect multiplug.
Refit
1. Connect multiplug to lamp and secure lamp to
wing.
Lamp assembly - tail
$% 86.40.70
Remove
1. Remove 2 Torx screws securing tail lamp to
bumper. Illustrations show up to 04MY.
2. Release lamp, disconnect multiplug and
remove lamp.
NOTE: Do not carry out further dismantling if
component is removed for access only.
3. Remove multiplug and bulb holders from tail
lamp.
Refit
1. Fit multiplug and bulb holders to replacement
tail lamp.
2. Position tail lamp, connect multiplug and
secure to bumper with Torx screws.
