Freelander Service Procedures
DOORS
REPAIRS
76-1-5
Door - tail assembly - remove for access
& refit
$% 76.28.19.99
Remove
1. Remove spare wheel from taildoor.
2. Remove RH rear quarter lower trim casing.
REPAIRS, Trim casing - rear quarter - lower
- 5 door.
3. Release and disconnect 3 multiplugs and rear
washer tube from lower 'E' post.
4. Remove 2 bolts from tail door check strap,
release strap and position aside.
5. Release door harness sheath from 'E' post and
pull harness through 'E' post.
6. Mark position of hinges.
7. Support weight of tail door.
8. Remove 6 bolts securing tail door hinges to
body and with assistance, remove tail door.
Refit
1. With assistance position door. Fit securing
bolts but do not tighten at this stage.
2. Position check strap and secure with bolts.
3. Align hinges and tighten bolts to 30 Nm (22
lbf.ft).
4. Feed door harness through 'E' post and secure
harness sheath.
5. Connect and secure multiplugs and rear
washer tube at 'E' post.
6. Fit rear quarter lower casing.
REPAIRS, Trim casing - rear quarter - lower
- 5 door.
7. Fit spare wheel to tail door.