Freelander Service Procedures
PANEL REPAIRS
77-2-48 REPAIRS
Refit
1. Secure vehicle harness to inner sill.
2. Position carpet to inner sill.
3. Fit side door aperture seal(s).
4. Fit treadplate from side door aperture(s).
5. Fit rear seat.
SEATS, REPAIRS, Rear seat - LH.
6. Fit front seat.
7. Fit front door striker to 'B/C' post.
8. Fit 'B/C' post lower finisher.
REPAIRS, Trim finisher - 'B' post - lower - 5
door.
9. Fit front seat belt.
Automatic belt assembly - front - 5 door.
10. Fit headlining.
11. Fit rear door.
- rear - remove for access & refit.
SEATS, REPAIRS, Rear seat - RH.
12. Connect all ECUs.
13. Connect alternator.
14. Connect battery earth lead.
Complete rear quarter - 3 door
In this procedure, the rear outer body side panel is
replaced in conjunction with the complete rear
quarter.
Remove
1. Disconnect battery earth lead.
2. Disconnect alternator.
3. Disconnect all ECUs.
4. Remove road wheel(s).
5. Remove sill lower finisher.
6. Remove rear bumper valance.
Bumper valance - rear - up to 04MY.
7. Remove rear wheel arch liner.
8. Remove door striker from 'B' post.
9. Remove treadplate from front door aperture.
10. Remove front door aperture seal.
11. Release carpet from inner sill and rear
heelboard and position aside.
12. Remove soft/hard top.
13. Remove tail door aperture seal.
14. Remove rear roof panel finisher.
15. Remove tail lamp.
16. Remove rear quarter lower casing.
REPAIRS, Trim casing - rear quarter - lower
- 3 door.
17. Remove rear quarter upper casing.
REPAIRS, Trim casing - rear quarter - upper
- 3 door.
18. Remove rear side seat belt.
19. Remove loadspace carpet.
REPAIRS, Carpet - luggage compartment.
20. Remove rear seat.
SEATS, REPAIRS, Rear seat - LH.
SEATS, REPAIRS, Rear seat - RH.
21. Remove rear body side casing.
REPAIRS, Trim casing - body side - rear - 3
door.
22. Remove headlining.
