L322 Range Rover Service Procedures
ENGINE MANAGEMENT SYSTEM - V8
REPAIRS
18-2-9
Sensor - camshaft position (CMP) - LH
$% 18.30.25
Before disconnecting the battery, ensure all text and
cautions in the battery disconnection section are
observed.
GENERAL INFORMATION, Electrical
Remove
1. Disconnect battery earth lead.
2. Remove engine acoustic cover.
Engine - V8, REPAIRS, Acoustic
3. Disconnect multiplug from CMP sensor.
4. Release CMP sensor harness from clip on
camshaft cover.
5. Remove bolt securing CMP sensor and remove
sensor. Discard 'O' ring.
Refit
1. Clean CMP sensor and mating face.
2. Fit new 'O' ring to CMP sensor.
3. Fit CMP sensor, fit bolt and tighten to 10 Nm (7
lbf.ft).
4. Connect multiplug to CMP sensor.
5. Secure CMP sensor harness to clip on
camshaft cover.
6. Fit engine acoustic cover.
Engine - V8, REPAIRS, Acoustic
7. Connect battery earth lead.
8. If a replacement sensor has been fitted, re-set
adaptions using TestBook/T4.
