L322 Range Rover Service Procedures
DRIVESHAFTS
REPAIRS
47-21
Propeller shaft - rear
$% 47.15.03
Remove
1. Position vehicle on lift.
2. Disconnect battery earth lead.
3. Remove exhaust system.
- V8, REPAIRS, Exhaust system &
mountings.
- Td6, REPAIR, Exhaust system and
mountings.
4. Petrol models only: Remove 5 nuts securing
LH heat shield. Remove heat shield.
5. Remove 8 nuts securing centre heat shield and
remove shield.
6. Remove 8 hexagonal headed screws securing
fuel tank heat shield and remove shield.
7. Raise vehicle to allow propeller shaft to rotate.
8. Reference mark rear propeller shaft for
reassembly.
9. Remove 6 nuts securing propeller shaft to
differential flange.
10. Release joint from differential flange and
support the shaft.
CAUTION: To avoid damage to gaiter or
joint, do not allow shaft to hang on joint.
