L322 Range Rover Service Procedures
INTERIOR FITTINGS
76-3-4
REPAIRS
Trim finisher - 'A' post - lower
$% 76.13.27
Remove
1. Remove carpet retainer.
2. Release sufficient door aperture seal to access
lower trim finisher.
3. Release and remove finisher horizontally from
2 retaining clips.
NOTE: Do not carry out further dismantling if
component is removed for access only.
4. Check condition of finisher retaining clips in
body, replace if damaged.
Refit
1. Fit retaining clips to body.
2. Fit and secure finisher.
3. Secure door aperture seal.
4. Fit carpet retainer.
Trim finisher - 'B' post - upper
$% 76.13.28
Before disconnecting the battery, ensure all text and
cautions in the battery disconnection section are
observed.
GENERAL INFORMATION, Electrical
Remove
1. Make the SRS system safe.
Supplementary Restraint System (SRS)
Precautions.
2. Remove front seat.
3. Release door aperture seal from 'B' and 'C'
posts.
4. Release 4 fixings securing 'B' post lower
finisher.
5. Release 'B' post upper finisher from fixings and
remove finisher assembly.
6. Remove and discard fixings from finisher.
7. Depress clips and remove 'B' post upper
finisher from lower finisher.
Refit
1. Fit upper 'B' post finisher to lower finisher.
2. Fit new fixings to finisher.
3. Fit finisher assembly to upper fixings, position
seat belt and secure lower finisher to 'B' post.
4. Fit door aperture seals.
5. Fit front seat.
6. Connect battery leads, earth lead last.
