LR3/Disco 3
Specifications
Lubricant
System Refrigerant Specification/Capacity
General Specification
Torque Specifications
Published : Jul 14, 2004
Item
Specification
Compressor oil
Denso ND-8 PAG oil
Total system capacity:
Front
130 cm³ (4.5 fluid ounces)
Rear
179 cm³ (5.9 fluid ounces)
Additional amount of oil to be added to system if a component is replaced:
Condenser
40 cm³ (1.4 fluid ounces)
Evaporator - Front or rear
40 cm³ (1.4 fluid ounces)
Pipe or hose
10 cm³ (0.35 fluid ounces)
Item
Specification
Refrigerant type
R134A
Total system capacity:
2.7 litre - Front system only fitted
550 grammes (10.25 ounces)
2.7 litre - Front and rear systems fitted
810 grammes (28.35 ounces)
4.0 and 4.4 litre - Front system only fitted
600 grammes (21.16 ounces)
4.0 and 4.4 litre - Front and rear systems fitted 900 grammes (31.83 ounces)
Item
Description
Compressor:
Make
Denso
Type
7SEU17
Sensor locations:
Ambient temperature sensor At the front of the vehicle
Smog sensor
At the front of the vehicle adjacent to the ambient temperature sensor
ICS/humidity sensor
On the instrument panel adjacent to the steering column
Solar sensor
On the vehicle centre line on top of the instrument panel
Pressure transducer
In A/C line - LH side of engine compartment
Description
Nm lb-ft
Compressor mounting bolts
25 18
Receiver/drier mounting bolts
10 7
Refrigerant line bolts
10 7
Condenser core bolts - Not 2.7 litre
10 7
Radiator bolts
25 18