LT230 Transfer Box - Differential Lock Selector Overhaul
TRANSFER BOX
14
OVERHAUL
Mainshaft input gear assembly
NOTE: Defender input gear illustrated.
1. Secure hand press LRT-99-002 in a vice.
2. Assemble collars LRT-41-003 around bearing
to be removed.
3. Position mainshaft in hand press, remove and
discard bearing.
4. Repeat above procedure for remaining
bearing.
Differential lock selector
1. Remove and discard self-locking nut retaining
selector lever.
2. Remove washer and selector lever.
3. Withdraw selector finger and shaft from
housing.
4. Remove and discard ’O’ ring.
