Range Rover P38
12
ENGINE
NEW RANGE ROVER
36
REPAIR
Refit
14. Fit engine mounting. Ensure domed head of
centre bolt faces towards chassis.
15. Carefully lower engine onto mounting and
disconnect hoist.
16. Fit new engine mounting nuts and tighten to
45
Nm (33 lbf.ft).
17. Lower vehicle.
18. RHD - Right hand engine mounting: Fit
steering column intermediate shaft
See
STEERING, Repair.
19. Right hand mounting: Remove lifting eye from
alternator fixing bolt.
20. Fit harness support bracket and secure with bolt.
21. Lay harness onto bracket and secure with cable
ties.
22. Fit cooling fan cowl and secure with clips.
23. Fit bolt to secure screen washer reservoir filler
tube.
24. Connect battery earth lead.
25. Fit battery cover and secure with fixings.
26. With assistance, release bonnet stay clips and
engage bonnet struts.
REAR ENGINE MOUNTING
Service repair no - 12.45.08
Remove
1. Raise vehicle on 4 post ramp.
2. Support transmission using a suitable stand.
3. Remove 4 nuts and 2 bolts securing mounting to
crossmember and discard nuts.
4. Remove transmission snubber bar.
5. If applicable, remove 2 bolts securing rear of
gearbox side acoustic covers to crossmember.