Range Rover P38
17
EMISSION CONTROL
NEW RANGE ROVER
4
REPAIR
EVAP CANISTER - LEVS
Service repair no - 17.15.13
Remove
1. Raise vehicle on 4 post ramp.
2. Remove 3 bolts securing air suspension
reservoir to mounting brackets.
3. Release air suspension reservoir and carefully
move aside.
4. Remove 2 bolts securing EVAP canister
mounting bracket to body.
5. Remove 2 nuts securing EVAP canister
mounting bracket to body.
6. Remove bolt securing EVAP canister to
mounting bracket. Collect nut and mounting
bracket.
7. Remove mounting bracket.
8. Position cloth to absorb any fuel spillage.
9. Release purge and tank vent pipes from EVAP
canister.
10. Remove clip securing CVS valve pipe to EVAP
canister.
11. Release pipe from EVAP canister and remove
canister.
CAUTION: Plug the connections.
Refit
12. Remove plugs and ensure all connections are
clean.
13. Connect CVS valve pipe to EVAP canister and
secure with clip.
14. Connect purge and tank vent pipes to EVAP
canister.
15. Position mounting bracket to EVAP canister and
secure with bolt.
16. Position mounting bracket to body and secure
with nuts.
17. Fit and tighten bolts securing mounting bracket
to body.
18. Lower vehicle.
