Freelander Service Procedures
EXTERIOR FITTINGS
REPAIRS 76-2-13
Bumper valance - rear - up to 04MY
$% 76.22.74
Remove
1. Remove rear mud flaps.
2. Remove both rear tail lamps.
3. Remove rear wheel arch extensions.
Wheelarch extension - rear wing part.
4. Remove 10 screws securing bumper valance to
body.
5. Remove 2 nuts and bolts securing bumper
valance to armature.
6. Remove 5 scrivets securing bumper valance to
body.
7. Remove 2 mud flap brackets.
8. NAS Models: Release side repeater,
disconnect multiplug and remove repeater.
9. With assistance remove bumper valance.
Refit
1. With assistance fit bumper valance and secure
with scrivets, screws, nuts and bolts.
2. NAS Models: Feed side repeater harness
through bumper, connect multiplug and fit
repeater.
3. Fit mud flap brackets and secure with screws.
4. Fit rear wheel arch extensions.
Wheelarch extension - rear wing part.
5. Fit both rear tail lamps.
6. Fit rear mud flaps.
Bumper valance - rear - from 04MY
$% 76.22.74
Remove
1. Remove rear mud flaps.
2. Remove both rear fog lamps.
3. Remove rear wheel arch extensions.
Wheelarch extension - rear wing part.
4. Remove 2 screws and remove both mud flap
retaining brackets.
5. Remove 6 Torx screws securing luggage
compartment carpet retainer to body.
6. Remove luggage compartment carpet retainer.
