LR3/Disco 3
Adaptive Front Lighting Module (86.54.06)
Removal
Installation
Published : Jul 13, 2004
1 .
Passenger side: Remove the cowl side trim panel. For additional information, refer to
Cowl Side Trim
Panel (76.13.27)
(Section 501-05)
2 .
Remove the adaptive front lighting control module.
Disconnect the electrical connector.
Remove the bolt.
1 .
Install the adaptive front lighting control module.
Tighten the bolt to 10 Nm (7 lb.ft).
Connect the electrical connector.
2 .
Install the cowl side trim panel. For additional information, refer to
Cowl Side Trim Panel (76.13.27)
(Section 501-05)