Range Rover P38
86
ELECTRICAL
NEW RANGE ROVER
6
REPAIR
ALTERNATOR - DIESEL
Service repair no - 86.10.02
Remove
1. Disconnect battery negative lead.
2. Remove alternator drive belt.
3. Release harness from terminal cover.
4. Release cover from alternator terminals.
5. Disconnect leads from alternator terminals.
6. Remove 2 bolts securing alternator to bracket.
7. Manoeuvre alternator clear of pipework. Remove
alternator.
Do not carry out further dismantling if
component is removed for access only.
8. Restrain shaft using an Allen key. Remove
pulley nut. Remove pulley.
9. Clean shaft and pulley.
10. Position pulley. Secure with nut. Tighten to
50
Nm. (37 lbf.ft)
Refit
11. Position alternator to bracket. Secure with bolts.
12. Connect leads to alternator terminals. Secure
with nuts.
13. Secure terminal cover. Engage harness sheath.
14. Fit and tension alternator drive belt.
15. Reconnect battery negative lead.
